光照、温度对黑鲷(♀)×真鲷(♂)杂交子代受精卵孵化效果的影响     

刘海林  张志勇  张志伟  许津  陈淑吟  贾超峰  祝斐  孟乾 《海洋科学》2018,42(5):108-115

为了研究不同光照强度、温度对黑鲷(Acantho pagrusschlegelii)(♀)×真鲷(Pagrosomus major)(♂)杂交F1代受精卵孵化效果及仔鱼存活的影响,作者采用试验生态学的方法比较不同温度(16、18、20、22、24、26℃)下杂交鲷受精卵的孵化率、畸形率、孵化时间、7日龄仔鱼的存活率;比较不同光照强度下(10、100、300、800、1500、4 000、10 000 lx)受精卵孵化率、畸形率、孵化时间;比较不同光照强度下(200、1 000、2 000、5 000、10 000、15 000、20 000 lx)7日龄仔鱼的存活率。结果表明:在盐度为22条件下,受精卵最高孵化率(34.00%)和最低畸形率(16.65%)的孵化温度为20℃;在16～26℃范围内,温度与孵化时间呈负相关,与7日龄仔鱼存活率也呈负相关。不同的光照强度对受精卵孵化率和孵化时间的影响不显著,孵化率为65.88%～71.88%;但大于800lx的光照会令畸形率上升(大于15.21%);另外,5000～10000lx的光照强度更适宜仔鱼生存,7日龄仔鱼存活率达到38%～40.75%。黑鲷(♀)×真鲷(♂)杂交子代最佳孵化温度为20℃,最适光照强度为5 000～10 000 lx。  相似文献   

波段选择协同表达高光谱异常探测算法     

朱德辉  杜博  张良培 《遥感学报》2020,24(4):427-438

高光谱遥感影像具有光谱分辨率极高的特点,承载了大量可区分不同类型地物的诊断性光谱信息以及区分亚类相似地物之间细微差别的光谱信息,在目标探测领域具有独特的优势。与此同时,高光谱遥感影像也带来了数据维数高、邻近波段之间存在大量冗余信息的问题,高维度的数据结构往往使得高光谱影像异常目标类和背景类之间的可分性降低。为了缓解上述问题,本文提出了一种基于波段选择的协同表达高光谱异常探测算法。首先,使用最优聚类框架对高光谱波段进行选择,获得一组波段子集来表示原有的全部波段,使得高光谱影像异常目标类与背景类之间的可分性增强。然后使用协同表达对影像上的像元进行重建,由于异常目标类和背景类之间的可分性增强,对异常目标像元进行协同表达时将会得到更大的残差,异常目标像元的输出值增大,可以更好地实现异常目标和背景类的分离。本文使用了3组高光谱影像数据进行异常目标探测实验,实验结果表明,该方法与其他现有高光谱异常目标探测算法对比,曲线下面积AUC(Area Under Curve)值更高,可以更好地实现异常目标与背景分离,能够更有效地对高光谱影像进行异常目标探测。  相似文献   

有限元法与伪谱法混合求解弹性波动方程   总被引：6，自引：0，他引：6  

马德堂  朱光明 《地球科学与环境学报》2004,26(1):61-64

在地震波场数值模拟中,有限差分法、有限元法和伪谱法都是常用的基本方法,但它们各有不同的适应性和优缺点,如有限差分法、有限元法都存在减弱网格频散和提高计算效率的矛盾,而伪谱法的网格频散小且计算效率高.有限差分法和伪谱法在处理地表结构复杂或地表剧烈起伏以及地下结构复杂的情况时存在较大的难度,而有限元法可较为理想地拟合起伏地表和任意弯曲界面,且可方便地处理自由边界条件和界面边界条件.尝试将有限元法和伪谱法相结合,形成地震波场数值模拟的一种混合方法,利用二者的优点,克服二者的缺点,达到既减弱网格频散又提高计算精度和效率的目的.并采用所谓的‘过度区域‘技术解决两种不同算法的衔接问题.模拟实例表明,给出的混合模拟方法不失为弹性波场数值模拟的一种有效方法.  相似文献   

Crystal-Melt Separation and the Development of Isotopic Heterogeneities in Hybrid Magmas     

Beard  James S. 《Journal of Petrology》2008,49(5):1027-1041

If a magma is a hybrid of two (or more) isotopically distinctend-members, at least one of which is partially crystalline,separation of melt and crystals after hybridization will leadto the development of isotopic heterogeneities in the magmaas long as some of the pre-existing crystalline material (antecrysts)retains any of its original isotopic composition. This holdstrue whether the hybridization event is magma mixing as traditionallyconstrued, bulk assimilation, or melt assimilation. Once a magma-scaleisotopic heterogeneity is formed by crystal–melt separation,it is essentially permanent, persisting regardless of subsequentcrystallization, mixing, or equilibration events. The magnitudeof the isotopic variability resulting from crystal–meltseparation can be as large as that resulting from differentialcontamination, multiple isotopically distinct sources, or insitu isotopic evolution. In one model, a redistribution of one-thirdof the antecryst cargo yielded a crystal-enriched sample with⁸⁷Sr/⁸⁶Sr of 0·7058, whereas the complementary crystal-poorsample has ⁸⁷Sr/⁸⁶Sr of 0·7068. In other models, crystal-richsamples are enriched in radiogenic Sr. Isotopic heterogeneitiescan be either continuous (controlled by the modal distributionof crystals and melt) or discontinuous (when there is completeseparation of crystals and liquid). The first case may be exemplifiedby some isotopically zoned large-volume rhyolites, formed bythe eruptive inversion of a modally zoned magma chamber. Inthe latter case, the isotopic composition of any (for example)interstitial liquid will be distinct from the isotopic compositionof the bulk crystal fraction. The separation of such an interstitialliquid may explain the presence of isotopically distinct late-stageaplites in plutons. Crystal–melt separation provides anadditional option for the interpretation of isotopically zonedor heterogeneous magmas. This option is particularly attractivefor systems whose chemical variation is otherwise explicableby fractionation-dominated processes. Non-isotopic chemicalheterogeneities can also develop in this fashion. KEY WORDS: isotopic heterogeneity; zoning; hybrid magma; crystal separation; Sr isotopes; aplite; rhyolite  相似文献   

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay     

槐文信  T.  Komatsu  曾小辉 《中国海洋工程》2005,19(4):601-612

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.  相似文献   

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography     

Zhang Libang Research Engineer  First Institute of Oceanography  Qingdao 《中国海洋工程》1991,(4)

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.  相似文献   

杂交鲆(牙鲆♀×夏鲆♂)胚胎发育的初步观察     

于道德  肖志忠  徐世宏  马道远  李军 《海洋科学》2007,31(2):55-60

通过人工调控促使亲本牙鲆(Paralichthys olivaceus)♀×夏鲆(Paralichthys dentatus)♂的性腺发育,人工干法授精获得杂交受精卵。杂交受精卵在温度为16.5~17.5℃,光照为100~400 lx,微充气条件下孵化。对杂交鲆胚胎发育全过程进行连续观察并与牙鲆及夏鲆的胚胎发育进行比较。结果表明:杂交鲆卵裂方式与其他大部分硬骨鱼类一样,属于盘状卵裂。受精后经过2 h 30 min进入2细胞期,7 h 45 min进入囊胚期,15 h 10 min进入原肠胚阶段,25 h 30 min进入神经胚期,49 h左右进入尾芽期。授精后63 h左右发现初孵仔鱼,68h左右50%的仔鱼孵出。在杂交鲆的胚胎发育中,主要有2个发育特征与母本类似而与父本不同:视囊的出现要早于体节的分化;孵化前,仔鱼在卵膜内环绕卵黄囊不到1周。但是在其孵化时间上却与父本相似。  相似文献   

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines     

Jinzhong Dou  Zhong-Jie Zhang 《Marine Georesources & Geotechnology》2021,39(1):15-33

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.  相似文献   

利用臭氧氧化实现复合生物反应器污泥减量   总被引：3，自引：0，他引：3  

王琳  孙德栋  黄海萍 《中国海洋大学学报(自然科学版)》2006,36(5):799-803

采用复合生物反应器,对应用臭氧氧化实现污泥减量进行了研究。2个相同的复合生物反应器平行运行,1个作为对照系统,1个作为氧化系统。反应器内装有半软性填料,投加量为10%。曝气池中悬浮污泥浓度为1 500 mg/L左右,生物膜浓度为2 000 mg/L左右。试验结果表明,随着臭氧氧化污泥比例的增加,污泥表观产率系数也随之降低,当臭氧投量为0.05 g O3/gSS,每天氧化的污泥分别为反应器内污泥的10%,20%,30%时,污泥表观产率系数分别减少28.2%,44.9%,75.8%。虽然随着污泥氧化比例的增大,氧化系统出水CODcr略有增加,但氧化系统仍能保持其生物处理能力,CODcr去除率在92%以上;2个系统之间氨氮的去除率相差不大,氧化系统的硝化能力基本没有受到臭氧氧化的影响。  相似文献   

GVG采样线代表性检验     

吴胜军  李涛  吴炳方  宋月君  冯奇 《遥感学报》2008,12(2):263-269

通过在实验区内设置不同类型的采样线,对GVG采样线的代表性进行检验.结果表明,高速公路和乡村道路类型的采样线对区域代表性的精度在95%以上;国道为86.726%;省道为65.447%.对于不同的缓冲区,高速公路、省道和乡村道路类型采样线,以200m缓冲区的代表性最好.而国道则以800m缓冲区的代表性最好.对于不同的作物而言,无论何种类型的采样线或者缓冲区,种植面积最大的棉花的精度是最好的.最低的是省道采样线1000m缓冲区,精度是78.146%,最好的是国道采样线800m缓冲区,精度是99.974%.除省道外,其他精度都在94.8%以上.这说明GVG采样线所获得的成数对于区域主要作物的代表性是很好的.  相似文献